No aluminium... but efficient all day !

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : mL
15 g
5 g
5 g
10 g

Containers to use:
Moule silicone
Cost: 5.25 € 5.25 EUR



180 days

5.25 €
Share the recipe
This deodorant balm recipe is natural and aluminum free. The beaume can be poured into a stick, turned into a solid deodorant bar, or rubbed by hand under the armpits.
This recipe does not contain water, it does not require a preservative. No perfume is proposed in this recipe: you can add more if you wish, or use your favorite perfume without the smell of your deodorant coming into it!

Our deodorant recipe is perfectly suited for all skin types and also suitable for strong physical activities.

Daily use. Apply to dry, clean armpits.

Precautions before starting
Before starting, it is advisable to clean and disinfect the work surface and the utensils: the prepared products will go on your skin, and we want to avoid any microbial contamination!

Thoroughly clean the BeautyMix. Then, soak a clean cloth in 70 ° alcohol (available in supermarkets) and use it to disinfect the BeautyMix bowl and all the utensils. Let dry.

Clean the worktop and remove any objects that might get in the way.

Place a clean paper towel on the worktop, and place the utensils on it. You will need a clean teaspoon or spatula, and a clean, dry container for pouring in when ready. Wash hands thoroughly.

Respect the dosages indicated for the ingredients of the recipe.
Need more information ? See "Get started" page.
Thoroughly disinfect the worktop and the BeautyMix with 70 ° alcohol and a clean paper.
Place the flat mixer in the BeautyMix tank, and place the tank on the scale.
Carry out the tare (zero) by pressing the T key. Weigh the required quantity of cocoa butter.
15 g
Tare (zero) by pressing the T key. Weigh the required amount of beeswax butter.
5 g
Tare (zero) by pressing the T key. Weigh the required amount of butter oil.
5 g
Place the bowl on the BeautyMix, and press the button 3 times to start the red program. Be careful that the mixer is not blocked by tablets. Wait until the ingredients are completely melted (restart the red program if necessary ).
Place the tank on the scale again, placing a paper towel between the hot tank and the scale to stabilize the weighing. Tare, and weigh the baking soda.
15 g
Tare, and weigh the corn starch.
10 g
Start the red program again to incorporate the powders.
Transfer the mixture while still hot to a stick, pot or silicone mold, and place in the fridge to cool quickly.
Clean the BeautyMix bowl while it is still hot, rubbing well with a cloth or sponge to remove all traces of wax.
If you use a silicone mold, you can unmold your deodorant once it has cooled, after at least 30 minutes in the cold.
Et voilà !