Detangling conditioner

This hair cream can be used as a conditionner, or a nourishing mask. It will close scales and restore the shine of your hair fiber.

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : mL
39.2 g
Water
20 g
5 g
0.2 g
5 g
5 g
0.6 g

Containers to use:
1 x Flacon (100 mL)
Cost: 10.60 € 10.6 EUR

TIME
20min

DIFFICULTY
Medium

CONSERVATION
90 days

COST
10.60 €
Share the recipe
Video of the recipe
 
 
Recipe

Bénéfices : cet après-shampoing parfaitement adapté pour les cheveux lisses, ondulés ou frisés. Il facilite le coiffage et le démêlage des cheveux têtus.
Pour : tous les types de cheveux.
Texture : crémeuse et gélatineuse.
Odeur : à vous de choisir selon l'hydrolat que vous préférez !

Focus sur les ingrédients de la recette :

Eau : c'est le solvant de la recette. Elle permet de dissoudre les autres ingrédients.
Hydrolat de fleur : l'hydrolat que vous allez utiliser permettra de parfumer votre produit et selon l'hydrolat choisi les vertus sont différentes.
Moussant ultra doux : c'est un tensioactif doux qui va permettre de ne pas alourdir le cheveux.
Conservateur : il permet de conserver efficacement la préparation pour éviter toute prolifération de microorganisme.
Huile amande douce : elle va nourrir, adoucir et discipliner les cheveux. Au choix avec l'huile de chanvre, qui elle va nourrir la fibre capillaire et apporter de la brillance.
Actif gel de lin : il va permettre l'effet démêlant mais aussi va donner de la souplesse et de la douceur à vos cheveux.
Acide lactique : il permet de diminuer le pH de la recette. Il a une très bonne affinité avec les cheveux, il va favoriser l'hydratation et donner de la brillance.

pH du produit fini : entre 5.5 et 6.5

Usage

Daily use. After your shampoo, apply the conditioner evenly to all of your wet hair. Leave on for 2 to 5 minutes, then rinse with clean water. Precautions for use: in case of contact with the eyes, rinse with clear water.

Precautions before starting
Before starting, it is advisable to clean and disinfect the work surface and the utensils: the prepared products will go on your skin, and we want to avoid any microbial contamination!

Thoroughly clean the BeautyMix. Then, soak a clean cloth in 70 ° alcohol (available in supermarkets) and use it to disinfect the BeautyMix bowl and all the utensils. Let dry.

Clean the worktop and remove any objects that might get in the way.

Place a clean paper towel on the worktop, and place the utensils on it. You will need a clean teaspoon or spatula, and a clean, dry container for pouring in when ready. Wash hands thoroughly.

Respect the dosages indicated for the ingredients of the recipe.
Need more information ? See "Get started" page.
Preparation
1
Thoroughly disinfect the worktop and the BeautyMix with 70 ° alcohol and a clean paper.
2
Place the flat mixer in the BeautyMix tank. Place the tank on the scale and carry out the tare (zero) by pressing the T key.
3
Weigh the required amount of glycerin.
5 g
4
Press T to reset the scale to 0, weigh the thickener by dispersing it little by little in the tank.
0.2 g
5
Press T, then add the required amount of cold tap water.
39.2 g
6
Press T, then add the foamer.
5 g
7
Press T, and add the hydrosol.
20 g
8
Press T, then add the emulsifier, breaking it into small pieces to make it melt faster.
10 g
9
Press T, then add vegetable oil.
5 g
10
Press T, then add the preservative (drop by drop, each drop represents approximately 0.02 g).
0.6 g
11
Place the bowl on the BeautyMix, and press the button 3 times to start the red program and wait for the BeautyMix to stop by itself. If everything is not completely melted at the end of the program, start it again .
12
Weigh the linseed gel separately in a small container and add it to the preparation at the end of mixing.
15 g
13
Homogenize with the blue program by pressing twice, then restart the blue program a second time. And finally transfer the conditioner to a clean bottle with a pump.
Et voilà !