Lipstick - raspberry pink

Softness and protection for very soft lips

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : g
5.3 g
2 g
2.4 g
0.3 g

Containers to use:
3 x Stick (5g)
Cost: 2.71 € 2.711 EUR



180 days

2.71 €
Share the recipe
Video of the recipe

Ce rouge à lèvres est entièrement personnalisable : créez votre couleur ! Il peut être coulé dans un moule pour créer un stick, ou dans un petit pot. Cette recette ne contenant pas d’eau, elle ne nécessite pas de conservateur.

Daily use. Keeps 6 months at ambient temperature.
Precautions before starting
Before starting, it is advisable to clean and disinfect the work surface and the utensils: the prepared products will go on your skin, and we want to avoid any microbial contamination!

Thoroughly clean the BeautyMix. Then, soak a clean cloth in 70 ° alcohol (available in supermarkets) and use it to disinfect the BeautyMix bowl and all the utensils. Let dry.

Clean the worktop and remove any objects that might get in the way.

Place a clean paper towel on the worktop, and place the utensils on it. You will need a clean teaspoon or spatula, and a clean, dry container for pouring in when ready. Wash hands thoroughly.

Respect the dosages indicated for the ingredients of the recipe.
Need more information ? See "Get started" page.
Thoroughly disinfect the worktop and the BeautyMix with 70 ° alcohol and a clean cloth.
Place the flat mixer in the BeautyMix tank, and place the tank on the scale. Tare (zero) by pressing the T key. You can put your container (stick, jar or mold) upstream in the refrigerator or freezer which will allow the balm to set immediately in the container when you pour it.
Weigh the required amount of cocoa butter.
5.3 g
Tare (zero) by pressing the T key. Weigh the required amount of beeswax.
2 g
Carry out the tare (zero) by pressing the T key. Weigh the required quantity of sweet almond oil.
2.4 g
Place the tank on the BeautyMix, and press the button 3 times to start the red program.
Place the tank on the scale, positioning the tank cover between the scale plate and the tank, to prevent the heat of the tank from influencing the weighing. Weigh the required amount of pigment in the container.
0.3 g
Press T to reset the scale to 0, then add the required amount of calcium carbonate. Mix lightly with the spatula.
5 g
Place the tank on the BeautyMix, and start the red program again to disperse the pigments well.
Transfer the mixture while it is still hot to a stick, pot or silicone mold, and place it in the refrigerator to harden for a few hours. Tip: you can also put it in the freezer for a few minutes and then put it in the refrigerator.
To clean your tank, rub the still hot tank with a paper towel to remove excess product as much as possible. Reheat the tank with a hot program if necessary. Then clean by rubbing with soap.
Et voilà !