Lipstick - coral

Softness and protection for very soft lips

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : g
5.5 g
2 g
2.45 g
0.05 g

Containers to use:
3 x Stick (5g)
Cost: 1.97 € 1.9725 EUR

TIME
10min

DIFFICULTY
Easy

CONSERVATION
180 days

COST
1.97 €
Share the recipe
Video of the recipe
 
 
Recipe

This lipstick is fully customizable: create your color! It can be poured in a mold to create a stick, or in a small pot. As this recipe does not contain water, it does not require a preservative.

Usage

Daily use possible. Store for 6 months at room temperature.

Precautions before starting
Avant de démarrer, il convient de nettoyer et désinfecter le plan de travail et les ustensiles : les produits préparés iront sur votre peau, et on veut éviter toute contamination microbienne !

Nettoyer soigneusement le BeautyMix. Ensuite, imbiber un chiffon propre d'alcool à 70° (disponible en supermarché) et l'utiliser pour désinfecter la cuve du BeautyMix et tous les ustensiles. Laisser sécher.

Nettoyer le plan de travail et écarter les objets qui pourraient gêner.

Poser un sopalin propre sur le plan de travail, et y déposer les ustensiles. Vous aurez besoin d'une cuillère à café propre ou spatule, et d'un contenant propre et sec pour verser la préparation une fois prête. Se laver les mains soigneusement.

Bien respecter les dosages indiqués pour les ingrédients de la recette.
Respecter les dates limites d'utilisation des ingrédients BeautyMix. 
Besoin de plus d'informations ? See "Get started" page.
Preparation
1
Thoroughly disinfect the worktop and the BeautyMix with 70 ° alcohol and a clean cloth.
2
Place the flat mixer in the BeautyMix tank, and place the tank on the scale. Tare (zero) by pressing the T key. You can put your container (stick, jar or mold) in the refrigerator or freezer which will allow the balm to set immediately in the container when you pour it.
3
Weigh the required amount of cocoa butter, beeswax, and oil, pressing T between each ingredient.
4
Place the tank on the BeautyMix, and press the button 3 times to start the red program.
5
Place the tank on the scale, positioning the tank cover between the weighing pan and the tank, to prevent the heat of the tank from influencing the weighing. Weigh the required amount of pigment in the container. Press T to reset the scale to 0, then add the required amount of calcium carbonate. Mix lightly with the spatula.
6
Place the tank on the BeautyMix, and start the red program again to disperse the pigments well.
7
Transfer the mixture while it is still hot to a stick, jar or silicone mold, and place it in the refrigerator to harden for a few hours. Tip: You can also put it in the freezer for a few minutes and then put it in the refrigerator.
8
To clean your tank, rub the still hot tank with a paper towel to remove excess product as much as possible. Reheat the tank with a hot program if necessary. Then clean by rubbing with soap.
Et voilà !