Recipe: Hydroalcoholic solution

The formulation recommended by the WHO for the production of hydroalcoholic solution

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : mL
21.6 g
Ethanol (Alcohol) at 90 °
1.81 g
Hydrogen peroxide (3% hydrogen peroxide)
0.55 g
1.97 g
Water

Containers to use:
1 x Flacon (30 mL)
Cost: 0.17 € 0.16500000000000004 EUR

TIME
10min

DIFFICULTY
Easy

CONSERVATION
90 days

COST
0.17 €
Share the recipe
Video of the recipe
 
 

Recipe

To control the spread of viruses and bacteria, follow normal precautions and wash your hands frequently with soap and water. The anti-bacterial solution presented here follows the recommendations of the World Health Organization for routine hand antisepsis.

The active ingredient here is alcohol. Glycerin is used as a humectant, and hydrogen peroxide is used to inactivate bacterial spores potentially present in the product at the time of preparation.

For storing your product, use a glass bottle that you have disinfected in boiling water. Also use boiled and cooled water in the preparation of this recipe to minimize the risk of bacteria.

Be sure to use your gel on hands without sequelae, cuts or skin disease.

Usage

Whenever possible, wash your hands with soap and water. Rub a dab of the solution onto the hands. Find WHO information on the link: Formulations des Produits hydro-alcooliques recommandés par l’OMS

Precautions before starting

Before starting, it is advisable to clean and disinfect the work surface and the utensils: the prepared products will go on the skin, it is therefore necessary to avoid any microbial contamination!

Thoroughly clean the BeautyMix. Then, soak a clean cloth in 70° alcohol (available in supermarkets) and use it to disinfect the BeautyMix tank and all the utensils. Let dry.

Clean the work surface and remove objects that could get in the way.

Place a clean paper towel on the work surface, and place the utensils on it. Have available: a clean teaspoon or spatula, and a clean, dry container for pouring the preparation once ready. Wash hands thoroughly.

Respect the dosages indicated for the ingredients of the recipe.
Need more information ? Consult the "Getting Started" page.
Preparation
1
Thoroughly disinfect the work surface and the BeautyMix with alcohol and clean paper. Carefully check the concentrations of the ingredients to be used: 90° alcohol, 3% hydrogen peroxide.
2
Place the flat mixer in the BeautyMix bowl, and place the bowl on the scale. Perform the tare (zero) by pressing the T key.
3
Weigh the required amount of ethanol.
21.6 g
4
Press T to reset the scale to 0, then add the required amount of hydrogen peroxide.
1.81 g
5
Press T to reset the scale to 0, then add the required amount of glycerine (one pump pressure = 0.3 g).
0.55 g
6
Press T to reset the scale to 0, then add the required amount of water.
1.97 g
7
Close the tank with its lid.
8
Place the tank on the BeautyMix, and press the button twice to start the blue program. Stop as soon as the mixture is homogeneous. Transfer to a clean, disinfected pump bottle. Wait 72 hours before use.
And There you go !